Skip to content

Certification support for the EU marketCE RoHS REACH ErP

Lighting housings · CNC customization

Lighting housings.
Made for your assembly.

Start with a lighting housing. Review the base construction, then define the CNC features, assembly fit and finish around your drawing.

A vertical CNC cutter machining an aluminium housing clamped inside a milling centre
Use the left and right arrow keys or swipe to change images. Press Space to pause or resume the slideshow.

CNC collection · 61 products

Small parts. Precise fit.

Cabinet and RV light housings, miniature spotlights, step-light bodies and matching installation parts. Choose a model, then customize the dimensions, openings and finish for your assembly.

Browse all 61 CNC products

HR-001 micro recessed spotlight housing

A narrow aluminum micro-spotlight body with a small countersunk front aperture and wire spring retainers. The compact stepped barrel and rear cable opening suit display shelves, cabinets and local equipment lighting.

We customize the micro housing, front aperture and wire retainers for your shelf or equipment panel. Send the lens, light-engine and cutout drawings to confirm the housing geometry.

HR-002 round-face miniature spotlight housing

A compact aluminum spotlight body with a broad flat circular face and twin spring clips. Its stepped rear barrel fits small recessed display and cabinet lights, with a frosted center for a soft front appearance.

We customize the flat bezel, stepped body and spring retention for your display shelf. Send the light-engine drawing, lens diameter and panel thickness to confirm the housing geometry.

HR-002 CNC aluminum side-window housing

A compact cylindrical housing with a wide side opening and internal mounting bosses. The open cup and recessed base give access to the light source and its fixing points.

We customize the diameter, height, side window, internal seats and fixing holes. Send your component drawing to set the machining dimensions and finish.

HR-003 grooved miniature spotlight housing

A compact aluminum spotlight body with a shallow conical face, circumferential rear grooves and a leaf-spring retaining strip. The recessed central aperture suits small display, jewelry-cabinet and shelf lighting layouts.

We customize the grooved body, bezel and retaining strip around your optical insert. Send the light-engine drawing and panel cutout to confirm the housing fit.

HR-004-L tilting miniature spotlight housing

A round recessed aluminum spotlight housing with an inner tilting face, paired spring clips and a finned rear section. The movable center directs light within the fixed outer bezel for cabinets, display shelves and small accent-light positions.

We customize the outer bezel, tilting center and spring arrangement for your display panel. Send the optical insert and cutout drawings to confirm the housing geometry.

HR-004-S compact tilting spotlight housing

A small recessed aluminum spotlight housing with an adjustable circular inner face and two coil-spring clips. Its finned rear section and compact barrel suit display cabinets, jewelry counters and shelves.

We customize the bezel, tilting center, rear fins and spring fixings for your display panel. Send the optical insert and cutout drawing to confirm the housing fit.

HR-005 recessed miniature spotlight housings

A family of recessed aluminum spotlight bodies with a flat circular bezel, recessed central face and leaf-spring retaining arms. Two body sizes support compact display and cabinet layouts, with axial slots at the rear and a central cable opening.

We customize the bezel, rear barrel, front opening and leaf-spring retention. Send the optical insert and panel drawing to match the compact or larger housing geometry.

HR-005 surface-mount miniature spotlight housings

A family of aluminum miniature spotlight bodies paired with cylindrical surface-mount sleeves. The sleeve surrounds the notched barrel and provides a side cable notch, creating a compact round accent light for cabinet and display surfaces.

We customize the cylindrical sleeve, cable notch and inner spotlight body to your mounting layout. Send the required outer envelope and optical insert drawing to match the compact or larger body.

HR-007 miniature spotlight housing with stepped rear dome

A compact recessed aluminum spotlight housing with a broad circular bezel and adjustable central face. The stepped dome at the rear provides a compact ribbed profile, while opposing coil springs retain the body in a display or cabinet panel.

We customize the bezel, inner face, stepped rear body and spring fixings. Send your optical insert and panel cutout to confirm the housing geometry.

Lighting housings · 14 products

Lighting shells for your CNC brief.

Round and square downlight shells, streetlight bodies and die-cast outdoor housings. Start from the listed construction, then review custom openings, fixing interfaces and assembly dimensions for the selected housing.

Browse lighting housings

Stamped steel housing

Round steel downlight housing kit

A wide-brim steel housing for indoor ceilings, corridors and hallways.

We customize the housing diameter, depth, mounting holes and finish to your drawing. We fit the housing to your LED board and cover, then make a sample for approval before production.

Stamped steel · Trimless housing

Trimless round downlight housing kits

Stamped-steel trimless downlight housings for indoor ceilings. The WG-W series covers four round sizes, from Ø85 to Ø225 mm, with shallow bodies and side mounting tabs.

We adjust the housing diameter, depth and mounting positions to your ceiling detail. We match the front cover and LED board fit, then make a sample to confirm the recessed assembly.

Aluminum housing · Laser-engraved rim

Decorative aluminum downlight housing kits

Six-inch aluminum downlight housings with laser-engraved decorative rims. The WG-180A and WG-180B models share a Ø180 × 34 mm envelope, with different rim patterns.

We adjust the housing diameter, depth, fixing holes and rim pattern to your drawing. We match the housing and cover to your lighting assembly, then make a sample for approval.

Stamped housing · Square profile

Square downlight housing kits with flat diffusers

White square downlight housing samples with flat diffusers, rounded corners and side mounting clips. The source names WG-F183 and WG-F134 sizes; confirm the material and dimensions for the selected construction.

We customize the square outline, depth, diffuser and mounting clips. Send the LED board, driver and ceiling drawing to confirm the material, mounting opening and assembly sample.

Steel housing · Ø98 mm

H-98 round downlight housing with blue spring clips

A small white round housing kit with a recessed flat diffuser and two blue-ended spring clips. The H-98 is listed with a 98 mm outer diameter and 68 mm ceiling cut-out.

We customize the housing diameter, mounting opening, diffuser and clip attachments. Send the LED board, driver and ceiling drawing to confirm the kit and assembly sample.

Steel housing · Ø120 mm

H-120 round downlight housing with blue spring clips

A white round housing kit with a flat diffuser and two blue-ended spring clips. The H-120 is listed with a 120 mm outer diameter and 80 mm ceiling opening for indoor downlight assemblies.

We customize the housing diameter, mounting opening, diffuser and clip details. Send the LED board, driver and ceiling drawing to confirm the kit and assembly sample.

Steel housing · Ø180 mm

180 mm steel downlight housing kit

A round steel housing for recessed indoor light assemblies, with a white powder-coated body, spring clips and a separate round cover. The A-180 has a listed 180 mm outer diameter and 150 mm ceiling cut-out.

We customize the housing diameter, depth, mounting holes and coating. Send your LED board, cover and driver dimensions to match the internal layout and make an assembly sample.

Steel housing · Ø180 mm

H-180 round steel downlight housing kit

A white powder-coated round downlight housing with a flat diffuser and two spring clips. The H-180 kit has a listed 180 mm outer diameter and 143 mm ceiling cut-out; rear views show the punched plate and clip mounting slots.

We customize the housing diameter, cut-out, plate holes, diffuser and powder-coated finish. Send the LED board, driver and ceiling details to confirm the mounting and complete assembly sample.

Stamped steel · Shallow profile

Thin round stamped downlight housings

Shallow white round metal housings with a broad flat rim and simple punched mounting holes. The source offers a 3–8 inch size range for indoor downlight and ceiling-light assemblies.

We customize the diameter, depth, mounting holes and finish. Send the LED board, driver and installation drawing to confirm the housing size and assembly sample.

Stamped steel · Surface-light housing

Round surface-light housings with embossed bases

White shallow round housings with a honeycomb-embossed base, central square opening and small fixing holes. The source lists multiple diameters with a common 23.5 mm overall depth for indoor surface-light assemblies.

We customize the diameter, body depth, fixing holes, cable openings and color. Send the LED board, diffuser and mounting drawing to confirm the housing and assembly sample.

Stamped steel · Ø180 mm

Round stamped light housing

A shallow white round metal housing with a broad flange, punched fixing holes and formed mounting features. The XD180 is supplied as a bare housing sample for a light assembly.

We customize the stamped profile, fixing holes, mounting features and finish. Send the LED board, driver and installation drawing to confirm the housing depth, tooling and assembly sample.

Stamped steel · Streetlight housing

TYN-003 three-window steel streetlight housing

A long black stamped housing for a solar streetlight assembly, with three large rectangular light openings, a smaller rectangular opening and a raised end compartment. The TYN-003 is listed at 565 × 215 mm.

We customize the stamped outline, window openings, mounting end and finish. Send the LED boards, solar system and pole fixing drawing to confirm the layout, seals and assembly sample.

Die-cast aluminum · Step-light housing

Dome-shaped step-light housing

A black die-cast aluminum housing with a domed cover, recessed front opening and two side fixing holes. The WJ-120 is listed as a Ø120 mm component for 3–9W light assemblies; three lenses appear in the sample photographs, while the source excludes the LED board.

We customize the die-cast body, light opening, fixing holes and finish. Send the LED board, optic and installation drawing to confirm the housing, included parts and assembly sample.

Die-cast aluminum · Finned floodlight housing

Round finned floodlight housing with adjustable bracket

A dark round die-cast aluminum housing with deep cooling fins, an adjustable U-bracket and round surface-mounting base. Sample photos show a multi-lens front arrangement; the source offers the housing kit without the LED board.

We customize the housing diameter, cooling fins, lens layout, bracket and base. Send the LED board and optical drawing to confirm the thermal fit, seals and assembly sample; a ground spike can be discussed.

Gloved hands measuring a brass-toned light-housing component with a caliper over a drawing
Dimensions, mating features and finish reviewed against the drawing.

Made around your assembly

Define the details that matter.

A good machining brief connects the visible design with the parts inside. We review both before preparing a sample.

Body geometry
Housing diameter, depth, wall section and the space for the LED board, optics and driver.
Fits & connections
Mounting holes, optical seats, cable entries and mating clearances from your assembly drawing.
Material & finish
Material grade, visible texture and colour, with the surface treatment reviewed for the chosen metal.
Assembly & inspection
Check the fixing pattern, seating faces, surface finish and fit with the mating parts on the sample.
Explore product adaptation

Drawing · machining · sample · production

From your drawing to a fitted sample.

Agree the design, manufacturing route and checks before the production order begins.

  1. Share your drawing

    Send a drawing, sketch, sample or product reference. Include dimensions, quantity and where the light will be used.

  2. Review the process

    Agree the housing construction, machining features, critical fits and finish. The quote sets out the sample cost and production plan.

  3. Check the sample

    Review the housing dimensions, openings, seating faces, surface finish and fit with the intended assembly.

  4. Approve production

    Confirm the drawing and sample, then agree the inspection points, identification and protective packing for the order.

Frequently asked questions

Before we begin.

What are your sample and production lead times?

Samples take approximately 15 days, and mass production typically takes 30–45 days.

Are sample fees refundable, and what is your MOQ?

Sample fees can be refunded when your mass production order reaches 2,000 units. The minimum order quantity (MOQ) is confirmed individually for each product and project.

What certifications can you provide for the EU market?

We can provide documentation for CE, RoHS, CE-LVD, CE-EMC and ErP, depending on the product. We can also assist with additional testing and certification to meet your project requirements.

What warranty do you offer on custom LED lighting?

Our custom-made LED lighting comes with a two-year warranty.

Will my ODM design remain confidential?

Yes. We keep your ODM designs and project information confidential. We can also sign a non-disclosure agreement (NDA) upon request.

Which trade terms do you support?

We support EXW, FOB and DAP. We can confirm the most suitable option for your order and delivery requirements.

Do you support DALI-2, 0–10V, Triac, DMX and Bluetooth?

Most of our products can be configured for a wide range of smart lighting controls, including DALI-2, 0–10V, Triac, DMX and Bluetooth. Custom models can be developed for your required control system. Compatibility is confirmed for each product and configuration.

Certification support

Ready for your market.

We can assist with certification testing for your new custom-developed lighting for the EU market.

Light-gray factory buildings and a weathered entrance sign bearing the company logo

Let’s make your next light.

A photo, a sample or a drawing is enough to begin. Tell us the quantity and application.

Send an inquiry

Aiden Alan

Your project contact

Let’s talk lighting.

Send a project inquiry to KEEPSUN